SC77309

Seachem AmGuard 500ml

3 items left

Seachem Amguard detoxifies toxic Ammonia for 48 hours. High levels of Ammonia can be lethal to fish.

Seachem AmGuard
  • Detoxifies Ammonia for up to 48 hours
  • Ideal for emergency situations
  • More effective than any other ammonia-binding product
  • Most concentrated product on the market

  • AmGuard safely, rapidly and efficiently removes toxic free ammonia. It is safe to use during tank cycling and is ideal for treating emergency situations.

    AmGuard is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesn’t degrade for nearly forty-eight hours. That’s nearly twice as long as our competitor's products.

    Unlike competing products, AmGuard converts it into a safe, non-toxic form that is readily removed by the tank’s biofilter. It does not alter pH.

    Ammonia can exist in two forms: free and ionised. It is only the free form that is toxic.

    Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12–14; at this pH AmGuard cannot function and thus a false positive reading will result.

    For long term ammonia control, use Seachem Stability and Matrix. Use Ammonia Alert or MultiTest: Free & Total Ammonia to directly monitor levels of free ammonia. AmGuard also removes chlorine and chloramines.

  • Use 1 capful (5 mL) for every 200 L (50 US gallons) daily or as needed to reduce ammonia.


  • If you have an Ammonia Alert that is reading “Alert”, then use 1 capful (5 mL) for every 400 L (100 gallons) daily.
  • If it reads “Alarm”, then use 1 capful for every 200 L (50 gallons) daily.
  • If it reads “Toxic”, then use 1 capful for every 80 L (20 gallons) daily.


  • If using our MultiTest: Free & Total Ammonia test kit, use 1 capful (5 mL) for every 40 L (10 gallons) to remove 1 mg/L (ppm) of free ammonia.
  • Alternatively you may employ the following formula for a variety of ammonia and water levels: 0.125AV=m (for volume in litres) or 0.5AV=m (for volume in gallons).
  • A=ammonia concentration in mg/L, V=the volume of water being treated and m=the volume of AmGuard to use in mL. For example, to remove 1 mg/L of ammonia in 100 gallons you would use 0.5*1*100=50 mL.

  • If water temperature is above 30 °C (86 °F) do not use.

    Free Shipping over $150

    FAQs

    Visit our store

    Join our Rewards Club

    Search